Table of Contents
Advertisement
VisuaLink 128/384 Quick Installation Guide
STEP
25.
Verify that all the equipment plugged into the
power strip are turned to the ON position. The
VisuaLink 128/384, camera and monitor have
their own power switches. If a device appears to
be still in the OFF position, check the power
connection from the Power Strip to the device.
The NT1 does not have a power switch. The
green LED on the front of the NT1 is an indication
the unit is powered ON.
Note: Make sure the monitor is selected for
Video 1.
26.
When the VisuaLink 128/384 is powered ON, a
display of the NEC America, Inc. logo, VisuaLink
name, POWERING UP and version number will
be displayed on the monitor.
NDA-24232 Revision 1.0
ACTION
Chapter 4
DRAWING
America, Inc.
VisuaLink
Powering Up
22.99.99
POWER
HEADSET
POWERLINE
B1
B2
Page 4-11
Advertisement
Table of Contents
