NETGEAR R6400 Quick Start Manual page 5

LED
USB 2.0‑Printer
port
Ethernet ports
1–4
WiFi On/Off button
with LED
WPS button
Description
The USB 2.0‑Printer LED is for the USB 2.0‑Printer port on
the front panel. NETGEAR recommends that you connect
a USB storage device to the USB 3.0‑Storage port and
connect a USB printer to the USB 2.0‑Printer port.
• Solid white. A USB printer is connected to the USB
2.0‑Printer port and is ready.
• Blinking. A USB printer is plugged in to the USB
2.0‑Printer port and is trying to connect.
• Off. No USB printer is connected to the USB 2.0‑Printer
port, or someone clicked the Safely Remove Hardware
button and it is now safe to remove the attached USB
printer.
The LED color indicates the speed: white for Gigabit
Ethernet connections and amber for 100 Mbps or 10
Mbps Ethernet connections.
• Solid. A powered‑on device is connected to the
Ethernet port.
• Blinking. The port is sending or receiving traffic.
• Off. No device is connected to this Ethernet port.
Pressing this button for two seconds turns the 2.4 GHz
and 5 GHz WiFi radios on and off.
If this LED is lit, the WiFi radios are on. If this LED is off,
the WiFi radios are turned off and you cannot use WiFi to
connect to the router.
This button lets you use WPS to join the WiFi network
without typing the WiFi password. The WPS LED blinks
white during this process and then lights solid white.
3