Safety; Intended Use; Target Group; General Safety Precautions - Siemens CCIS1337-LP Configuration Manual

Safety

2 Safety
2.1

Intended use

2.2

Target Group

2.3

General safety precautions

8
Siemens Building Technologies
Fire Safety & Security Products
The IP camera is used in indoor areas for showing live images via a network.
It is not to be used outdoors nor in the protective housing.
Target Group Qualification
Start-up personnel Appropriate
professional training
regarding the function
and units or systems to
be brought into
operation.
Read the general safety precautions before operating the unit.
Keep this document available for reference.
If the product is pasdsed on to another party, include this document.
Installation, operational start-up, configuration and repairs should only be
performed by qualified personnel.
See Section 2.2 Target Group.
Burn hazard
Do not touch the housing of the unit while it is in operation.
–
Overheating hazard
During installation and operation, ensure that there is sufficient air circulation
–
for the IP camera to prevent heat build-up.
Do not use the IP camera in the protective housing.
–
Electric shock hazard
Operate the IP camera only with the specified voltage.
–
If any liquid or solid matter should get into the housing, disconnect the camera
–
from the power supply and have it checked by an authorized dealer before
using it again.
Do not make unpermitted modifications to the unit. Changes lead to a loss of
–
operating privileges for this unit.
Malfunctions
The unit generates, uses and can emit radiofrequency energy. If not installed
–
and used according to instructions, interference with radio and television
reception may result.
Activity Unit Condition
Start-up personnel bring New, installed, rebuilt
the unit or system which unit or system with
has been installed into malfunction.
operation on-site.
04.2006