Administration
IP Network Parameters
56
2) Navigate to Network > IPv4 configuration or IPv6 configuration, depending on
the settings in Protocol Mode IPv4/IPv6. Set DHCP Enabled , resp. DHCPv6
Enabled and LLDP-MED Enabled to "not selected". Enter the IP address and
the Subnet mask. If applicable, enter the Default route. Afterwards, click
Submit.
3) After the phone's network service has restarted, the other IP parameters can
be configured.
Administration via Local Phone
|
--- Admin
|--- Network
General IP configuration
|--- Use LLDP-MED
|--- Use DHCP
|--- Use DHCPv6
OpenScape Desk Phone IP, Phone Administration, Administrator Documentation
A31003-D3000-M100-01-76A9, 02-2013