Dialing; Canonical Dialing Configuration - Siemens A31003-D3000-M100-01-76A9 Administrator User Manual

Administration

Dialing

3.12 Dialing

3.12.1 Canonical Dialing Configuration

162
• User ID: SIP user ID of the DSS destination.
• Password: Password corresponding to the SIP user ID.
• Outgoing calls: Determines whether forwarding and DND at the target phone
will be overridden on a DSS call.
Value range: "Normal", "Direct"
Default: "Normal"
• Action on calls: Handling of an active call when pressing the DSS key.
"Consult": the user can start a consultation with the DSS target; "Transfer": the
user can transfer the call to the DSS target.
Value range: "Consult", "Transfer", "No action"
Default: "Consult"
• Allow in Overview: Determines whether the line appears in the phone's line
overview.
Value range: "Yes", "No"
Default: "Yes"
Administration via WBM
System > Features > Program keys > DSS
Related Topics
Related Topics
Call numbers taken from a directory application, LDAP for instance, are mostly
expressed in canonical format. Moreover, call numbers entered into the local
phone book are automatically converted and stored in canonical format, thereby
adding "+", Local country code, Local national code, and Local enterprise
number as prefixes. If, for instance, the user enters the extension "1234", the
local country code is "49", the local national code is "89", and the local enterprise
number is "722", the resulting number in canonical format is "+49897221234".
OpenScape Desk Phone IP, Phone Administration, Administrator Documentation
A31003-D3000-M100-01-76A9, 02-2013