Siemens A31003-D3000-M100-01-76A9 Administrator User Manual page 237

A31003-D3000-M100-01-76A9, 02-2013
OpenScape Desk Phone IP, Phone Administration, Administrator Documentation
5) Click on to create the first dial plan rule.
6) Enter the following data:
Parameter
Digit string 3
Action S
Minimum length 4
Maximum length 4
Timer 0
Summary: This rule determines that digit strings which begin with 3 and have
a length of 4 digits are sent to the server without delay after the last digit has
been entered.
7) Click on to create the second dial plan rule.
8) Enter the following data:
Parameter
Digit string 0
Action C
Minimum length 1
Maximum length 1
Timer 1
Summary: When 0 is entered as first digit, the phone will wait 1 second. After
this, 0 will be sent to the server, which might result in a call to an operator, for
instance. When further digits are entered during the 1 second time span, the
next dial plan rule will take control.
9) Click on to create the third dial plan rule.
10) Enter the following data:
Value Description/Remarks
This rule matches numbers beginning with 3. For
instance, theses might be internal numbers.
When all criteria are met, the number is sent to the
server.
This rule matches numbers with a length of 4 digits.
The specified Action will take place without delay
when all other criteria are met.
Value Description/Remarks
This rule matches numbers beginning with 0. In the
USA, this number calls the operator.
When Minimum length, Maximum length, and the
length of the digit string entered by the user match,
the Timer is started. When it expires, the digits are
sent to the server. When another digit is entered
before expiry, the next dial plan entry will come into
operation.
This rule matches numbers with a length of 1 digits.
The phone waits 1 second for further digits. If the
user does not enter any further digits, the action
specified in Action is initiated.
Examples and HowTos
Example Dial Plan
237