NEC Univerge SV8100 Features And Specifications Manual page 845

UNIVERGE SV8100
Program
Program Name
Number
24-03-01 Park Group – Park Group Number Assign an extension to a Park
Operation
To Park a call in a system orbit:
You can Park Intercom or trunk calls.
1. Press the Park key (Program 15-07 or SC 752: 04 + orbit).
The Park key LED lights.
If you hear busy tone, the orbit is busy. Try another orbit.
2. Use Paging to announce call.
3. Press Speaker to hang up.
If not picked up, the call recalls to you.
- OR -
1. At the multiline terminal or 2-button telephone, press Hold.
- OR -
At a 500/2500 single line telephone, hookflash.
2. Dial 6 and the Park orbit (01~64).
#
If you hear busy tone, the orbit is busy. Try another orbit.
If you hear a busy tone, the orbit is busy. Dial #6 if enabled in Program 20-11-27 (Call Park AutoSearching) to
search for an idle park location in ascending order.
3. Use Paging to announce the call.
4. Press Speaker to hang up.
If not picked up, the call recalls to you.
The parked call recalls after the Park Hold Time (Program 24-01-06). The call rings the extension to which it
recalled for the Hold Recall Callback Time (Program 24-01-02). The call then goes on Hold for the Park Hold
Time, then recalls again for the Hold Recall Callback Time. The call continues to cycle between Hold and recall
until the extension user answers the call or the outside party hangs up.
SV8100 Features and Specifications Manual
Description/Comments
Group (01~64). An extension user
can pick up only a call parked by a
member of their own Park Group.
Assigned Data
1~64
(default = 1)
Issue 1.0
Level
1 2 3
2 - 821