NEC Univerge SV8100 Features And Specifications Manual page 789

UNIVERGE SV8100
Related Features
None
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Program Name
Number
10-04-01 Music on Hold Setup – Music on
Hold Source Selection
10-04-02 Music on Hold Setup – Music on
Hold Tone Selection
10-04-03 Music on Hold Setup – Audio Gain
Setup
10-21-04 CD-CP00-AU Hardware Setup –
External Source I/O Selection on
CD-CP00-AU
SV8100 Features and Specifications Manual
Description/Comments
Determine whether the system
should use No Tone (0), External (1)
Music Source, or Internal Service
Tone (2). If set to 1, Program 14-
08-01 must be set to 0 or 1.
When Program 10-04-01 is set to 1
(Internal), define the music that is
played for Music on Hold.
Set the Music on Hold audio gain
(1~63).
Define what the I/O ports on the
CD-CP00-AU are used for.
Assigned Data
0 = No Tone
1 = External MOH
2 = Service Tone
3 = Internal MOH
(default = 2)
[In case Item 1 is 0]
1 = Download File1
2 = Download File2
3 = Download File3
[In case Item 1 is 1, 2, or
3]
1~100 = VRS Message
Number
(default not assigned)
1~63 (-15.5 +15.5dB)
[default = 32 (0dB)]
0 = External MOH (CN8)/
External Speaker(CN9)
1 = BGM source (CN8)/
External Speaker(CN9)
2 = External MOH (CN8)/
BGM source (CN9)
Relations between
CN number and
Relay number are as
follows:
CN8 = Relay2
CN9 = Relay1
(default = 1)
Issue 1.0
Level
1 2 3
2 - 765