Static Ip Setup - Samsung SPE-100 User Manual

Item
URL
g
IPv4
h
IPv6
i
Search
j
Auto Set
k
Manual Set
l
Exit
m
Use IP Installer version 1.44 or higher.
M

STATiC ip SeTup

manual network Setup
Run <ip installer_v 1.44.exe> to display the network encoder search list.
At the initial startup, both [Auto Set] and [manual Set] will be grayed out.
For network encoders found with the IPv6 setting, these buttons will be grayed out as the network
M
encoders do not support this function.
1.
Select a network encoder in the search
list.
Find the MAC (Ethernet) address
labeled on the rear of the network
encoder.
Both the [Auto Set] and [manual Set]
buttons will be activated.
2. Click [manual Set].
The Manual Setting dialog appears.
The default values of <ip Address>, <Subnet mask>, <Gateway>, <HTTp port>
and <vnp port> of the network encoder will be displayed.
The default <password> is "4321".
DDNS URL address enabling access from the external Internet.
However, this will be replaced with the <IP Address> of the network
encoder if DDNS registration has failed.
Scans for network encoders with the IPv4 setting.
Scans for network encoders with the IPv6 setting.
Scans for network encoders that are currently connected to the network.
However, this button will be grayed out if neither IPv4 nor IPv6 is checked.
The IP Installer automatically configures the network settings.
You should configure the network settings manually.
Exits the IP Installer program.
Description
English _2