Measurement Start Input And Result Output Settings - Sharp IV-S30J User Manual

16-2 Measurement start input and result output settings

The combinations of various settings for item "
item " ( )OUT I/F (PARAL.)" on the "I/O CONDITIONS" screen (page 16-1 to 4) are explained
below.
Measurement
start input interface
- Parallel
- General purpose
serial
- CCD trigger
The time required to change object types is calculated differently according to the type of
measurement start input I/O, as follows:
Measurement start input I/F
Parallel
General-purpose serial
CCD trigger
Result output
Parallel (1)
Computer link/parallel (2)
General purpose serial/parallel
General purpose serial/parallel
Object type
Start sampling
Parallel (Parallel)
General purpose (General purpose
serial
Auto
General purpose
Time to change object type
Included in the measurement execution time
Not included in the measurement execution time
Not included in the measurement execution time
16-5
Setting the Input/Output Conditions
MEAS INP I/F," item " START CCD SAMPL," and
(3)
(4)
change
Result output
Parallel
Computer link/parallel
General purpose serial/parallel
General purpose serial/parallel
serial)
Parallel Parallel
General purpose serial/parallel
serial
(5)
(6)
(7)
(8)
(9)
(10)
16