Toshiba MJ-1104 Service Manual page 171

(3) Remove 1 screw, and then take off the actu-
ator and the spacer.
(4) Release the latch, and then take off the sta-
tionary tray paper-full sensor.
[Q] Feeding sensor (S22)
(1) Take off the relay guide, feeding discharge
brush and right cover.
 P.4-7 "[K] Relay guide / Feeding dis-
charge brush / Right cover"
(2) Remove 1 screw, and then disconnect the
connector and take off the sensor bracket.
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
Spacer
Fig. 4-290
Stationary tray
paper-full sensor
Fig. 4-291
Fig. 4-292
4 - 103
Actuator
Sensor bracket
MJ-1103/1104
DISASSEMBLY AND INSTALLATION
4