Toshiba Strata CIX Programming Manual page 125

Program Code
33
33
33
33
33
33
33
48
49
49
213
49
49
51
51
51
52
52
52
80
Strata CIX/CTX Telephone Button Programming 11/04
Sub-
FB
parameter
100 The sub-parameters for Feature Code (Key Number) must be
110 assigned.
FB01
120
130
140
The line number entered is out of range for the system's
- 120
capacity.
- 130 The GCO key group/index entered is out of the range.
- 140 The POOL group entered is out of the range.
- 530 The BGM number entered is out of the range.
- 540 The door lock number entered is out of the range.
- 900 The application number entered is out of the range.
-
Essential sub-parameter values must be entered.
Two or more PhDNs with the same value are registered to one
FB01
110
extension.
700 The feature code(s) allowed to attendant console only is
790 registered.
800
FB01
810
820
830
Two or more DSSs with the same value are registered to one
FB01
610
extension.
120 The entered DN does not exist in the system.
130
FB01
560
610
The Prime DN entered conflicts with a value of an existing
-
numbering scheme.
The secondary/PhDN entered cannot be registered. The
FB01
110
number conflicts with an existing number scheme.
When setting an owner extension to the additional information
120
FB01
of CO, GCO, the said CO, GCO keys are not assigned to the
130
Feature Buttons of the owner extension.
The Primary DN entered conflicts with an existing DKT
-
extension.
The secondary/PhDN entered cannot be registered. The
FB01
110
number conflicts with an existing ISDN extension(s), etc.
120 The CO or GCO Owner DN entered does not exist.
FB01
130
FB00
The specified Prime DN does not exist in the system.
Station Programming Error Codes
Error Descriptions
System Error Codes
2-9