Message
ID
KAPL01016
The target CHA port was not found.
-W
Operation name = aa...aa
KAPL01018
The target device was not found.
-W
Operation name = aa...aa
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
Message Text
Messages
Explanation
Execute the view operation of the
HDLM command (dlnkmgr view
-path) and check the value
displayed in PathName. Use the
two leftmost digits of PathName
for the relevant HBA port, and
then retry. For details on the
view operation,
seeview (Displays
Information) on page
Details
The path ID indicated by -pathid
and required by the -cha
parameter is not an object of
HDLM management.
aa...aa: monitor, offline, or
online
Action
When AutoPATH_ID is
¢
specified for -pathid:
Execute the view operation
of the HDLM command
(dlnkmgr view -path) to
check the target CHA port
and the AutoPATH_ID that
passes through that CHA
port. Next, specify the
corresponding AutoPATH_ID,
and retry the operation. For
details on the view
operation, see
Information) on page
When CHA_ID is specified for
¢
-chaid:
Execute the view operation
of the HDLM command
(dlnkmgr view -cha) to
check the target CHA port
and the CHA_ID of that CHA
port. Next, specify the
corresponding CHA_ID, and
retry the operation. For
details on the view
operation, see
Information) on page
Details
The specified host device name
could not be found.
aa...aa: view
Action
6-30.
view (Displays
6-30.
view (Displays
6-30.
8-7