The shaded portion indicates the text to be edited.
Note
6
Apply the settings in the HDLM driver unconfiguration definition file (/
.
opt/DynamicLinkManager/config/dlmfdrv.unconf) to the HDLM driver
configuration definition file (/kernel/drv/dlmfdrv.conf):
Execute the following command:
# /opt/DynamicLinkManager/bin/dlmsetconf -u
7
Execute the dlmcfgmgr utility shown below to make the HDLM driver
.
recognize the LU to be managed by HDLM:
# /opt/DynamicLinkManager/bin/dlmcfgmgr -a
8
Check the status of the path accessing the LU to be managed by HDLM.
.
The following shows an example of executing the command. The shaded
portion is the path to access the LU to be managed by HDLM.
4-60
Figure 4-18 The /opt/DynamicLinkManager/config/dlmfdrv.unconf
Do not make any modifications other than adding or deleting the hash
mark (#) in front of the LDEV property line corresponding to the LU.
HDLM Operation
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
file (after editing)