D-Link Unified Access System
The drop-down menu lists each associated client by MAC address. To view status information for a different client, select its
MAC address from the list.
Table 237
describes the fields on the Client Detail page.
Field
Client IP Address
CP Configuration
Protocol
Session Time
Switch Type
User Name
Interface
Verification
Switch MAC Address
Switch IP Address
Viewing the Client Statistics
Use the Client Statistics page to view information about the traffic a client has sent or received.
Page 380
Captive Portal Configuration
Figure 267: Client Detail
Table 237: Client Detail
Description
Identifies the IP address of the wireless client (if applicable).
Identifies the CP configuration the wireless client is using.
Shows the current connection protocol, which is either HTTP or HTTPS.
Shows the amount of time that has passed since the client was authorized.
Shows whether the switch handling authentication for this client is the local switch or a peer
switch in the cluster.
Displays the user name (or Guest ID) of the connected client.
Identifies the interface the wireless client is using.
Shows the current account type, which is Guest, Local, or RADIUS.
Shows the MAC address of the switch handling authentication for this client. If clustering is
supported, this field might display the MAC address of a peer switch in the cluster.
Shows the IP address of the switch handling authentication for this client. If clustering is
supported, this field might display the IP address of a peer switch in the cluster.
Software User Manual
Document 34CSFP6XXUWS-SWUM100-D7
12/10/09