Table 110: Garp Status Fields - D-Link DWS-4026 User Manual

Software User Manual
12/10/09
The GARP Status page contains the following fields:
Field
Switch GVRP
Switch GMRP
Slot/Port
Port GVRP Mode
Port GMRP Mode
Join Timer (centisecs)
Leave Timer (centisecs)
Leave All Timer (centisecs)
Document 34CSFP6XXUWS-SWUM100-D7

Table 110: GARP Status Fields

Description
Shows whether the switch GVRP protocol is enabled or disabled.
Shows whether the switch GMRP protocol is enabled or disabled.
Identifies the system interface.
Shows the GARP VLAN Registration Protocol administrative mode for the port. If the
mode is Disabled, the protocol will not be active and the Join Time, Leave Time and
Leave All Time will have no effect.
Shows the GARP Multicast Registration Protocol administrative mode for the port. If the
mode is Disabled, the protocol will not be active, and Join Time, Leave Time and Leave
All Time have no effect.
Shows the time between the transmission of GARP PDUs registering (or re-registering)
membership for a VLAN or multicast group in centiseconds.
Displays time lapse, in centiseconds, that the switch waits before leaving its GARP
state. Leave time is activated by a Leave All Time message sent/received, and
cancelled by the Join message received.This allows time for another station to assert
registration for the same attribute in order to maintain uninterrupted service.
Displays time lapse, in centiseconds, that all switches wait before leaving the GARP
state. The leave all time must be greater than the leave time. The Leave All Time
controls how frequently LeaveAll PDUs are generated. A LeaveAll PDU indicates that
all registrations will shortly be deregistered. Participants will need to rejoin in order to
maintain registration.
D-Link Unified Access System
Configuring GARP Page 205