Managing Auto Configuration (Web)
This section provides information about the OpenManage Switch
Administrator pages to use to manage images and files on a PowerConnect
M6220/M6348/M8024/M8024-k switch. For details about the fields on a page,
click
at the top of the page.
Auto-Install Configuration
Use the Auto-Install Configuration page to allow the switch to obtain
network information (such as the IP address and subnet mask) and
automatically download a host-specific or network configuration file during
the boot process if no startup-config file is found.
To display the Auto Configuration page, click System → General → Auto-
Install Configuration in the navigation panel.
Figure 14-1. Auto-Install Configuration
395
Auto Image and Configuration Update