Figure 32-10. Router Route Entry and Preference Configuration
3 Next to Route Type, use the drop-down box to add a Default, Static, or
Static Reject route.
The fields to configure are different for each route type.
Default — Enter the default gateway address in the Next Hop IP
•
Address field.
•
Static — Enter values for Network Address, Subnet Mask, Next Hop
IP Address, and Preference.
•
Static Reject — Enter values for Network Address, Subnet Mask, and
Preference.
4 Click Apply.
The new route is added to the routing table.
908
Configuring IP Routing