Table of Contents
Advertisement
Guide the supply hose downwards within the recess
3.
.
Open the hose clamps
4.
hose.
Install the supply hose with connection elbow on the
5.
domestic connection.
Only tighten the plastic union nut by hand.
Do not subject the supply hose to tension, trap or
squash it, or bend it too tightly.
If the hose length is not sufficient, you can use a
hose extension. A hose extension with a length of
2 m is available from customer service.
Check the water connection for leak-tightness.
6.
In the event of a leak, stop the water again immedi-
ately and tighten the connection.
32.10 Installing the appliance
Slide the appliance in fully and centre it.
1.
and reinsert the supply
Screw the appliance into place.
2.
Note: The gap between the worktop and the appliance
must not be closed by additional battens.
Thermal insulation strips must not be fitted to the side
panels of the surround unit.
32.11 For handleless kitchens with vertical
bar handle strips:
Attach a suitable filling piece in order to cover any
1.
sharp edges and to guarantee a safe installation.
Pre-drill aluminium profiles to establish a screw con-
2.
nection.
Installation instructions en
57
Advertisement
Table of Contents
