Advertisement
To mount the headshell, loosen the headshell
locking
screw and insert the headshell with the phono cartridge in
place. Next securely tighten the locking screw. Be sure to
keep the headshell straight when inserting it into the
tonearm
as it is very easy to damage the four contact pins
inside the headshell.
Mounting the headshell
Push the headshell
straight into
the tonearm
Tonearm
Headshell
Cartridge
Proceed with the balance adjustment after mounting and
installing the main weight assembly.
Disconnect the
power supply to prevent turntable rotation. Also, be
sure to set the ANTI-SKATING contro! to "OFF".
1. Set the cueing switch to the DOWN
" EL" position
and depress the arm lifter.
Balance adjustment
P-520
First release the arm lock. Then bring the tonearm
away from the arm rest.
Carefully release the finger hook and check to see if
the tonearm
is horizontally balanced.
Adjust the main weight until the tonearm is in a per-
fectly horizontal position.
Once the tonearm has been balanced, return it to the
arm rest.
Headshell is too heavy
(rotate the Balance adjustment knob in the direction of the arrow)
Cartridge
\
Tonearm
Rear assembly is too heavy
(rotate the Balance adjustment knob in the direction of the arrow)
Advertisement
