Advertisement
Eres
Pars
Ci
meaw
PEt
OPTA
MAES OTNAGHT TOCAR
DLIEAT
ŽOS CURA
=
i
TERNO
O lates
bogege.
7 cavdos
AMA
3
Seu) mai sura
Ls
[z=
EEE L
AMAHA ml
Fe | Sect Be
P-520
@ SPEED SWITCH
|
|
This is used to select the turntable speed.
* When playing a 33-1/3 rpm record, set the switch to
"33 BA and when playing a 45 rpm record, set the
switch to "45.
uT
opan
ogogua
ancase
aconda
E)
@ RECORD SIZE SELECTOR
SWITCH
Set the switch that corresponds to the size of record you
wish to play.
Set the switch to the "30" BE when playing a 30 em LP
and set the switch to 17" sm with a single or LP measur-
ing 17 em.
@ SPEED CONTROL
KNOB
This gives approximately +3.0% adjustment in turntable
platter rotation speed.
88
|
Refer to the section on adjust-
ing the platter speed on page 8.
Vaas
Speed control knob
@ STROBOSCOPE
The P-520 features a stroboscope for accurate indication
of turntable speed.
@ REPEAT SWITCH
|
|
Depress the repeat switch when you want to repeat the
same side of the record.
O CUEING SWITCH
This is an oil-damped
system
which
gently
raises and
lowers the stylus from the record surface.
@ CUT SWITCH
Depress this switch when you wish ta stop record play.
The tonearm will rise and return to the arm rest and the
motor will stop.
© PLAY SWITCH
|
When this switch is depressed, the auto play system is
activated. If the cueing switch @ is in the UP "ma " posi-
tion, the stylus will not descend onto the record. For auto
play, make sure that the cueing switch is in the DOWN
" E "position.
O ANTI-SKATING KNOB
This is a spring-lever type anti-skating control. Refer to
page 7 for adjustment.
O ARM REST/ARM LOCK
When transporting the turntable, be sure that the tonearm
has been secured to the arm rest.
Locked
Tonearm
@ HEADSHELL
When fitting it into the tonearm pipe, keep it straight and
push it into the tonearm end gently so that the connector
pins are not damaged
in the process.
Advertisement
