Advertisement
Cartridges with weights ranging from 2.5 to 9 grams may
be used with this turntable.
1.
Properly connect the headshell
leads to the pins on the
cartridge.
l
2.
Loosely mount the cartridge to the headshell with
cartridge mounting bolts.
Mounting the cartridge
Red (+R)
White (+L)
DD
ori
hook
op
Cartridge
Cartridge
Nuts
pa
L
R
White (+L)
+
Red (+R)
Blue (—L)
Green (—R)
Fig. 1
. Align the stylus with the reverse side of the turntable
sheet and after adjusting the overhang, secure the
cartridge mounting bolts. Overhang is correct when
stylus point contacts the perpendicular line on the
reverse side of the turntable sheet lines up with the
tip of the stylus.
install the
cartridge so
that it comes
parallel to
the line.
Align the stylus point
in the center.
w
P-Mount Cartridge
P-mount headshell is only for P-mount cartridge.
Mounting is as follows.
"
1. Loosen the bolt.
2. Push the cartridge straight
into the Headshell.
3. Tighten the bolt.
Advertisement
