Device Control Block (Search Dial) - Sony G363-ZR0-LAX1 User Manual

When the VTR/disk recorder/frame
memory operation mode is enabled
Moving the joystick sideways controls the
tape transport/disk drive/frame memory

Device Control Block (Search Dial)

Using the device control block (search
dial), you can directly operate an XDCAM,
disk recorder, VTR, other external device,
4 DELAY button
2 Device selection buttons
a Timecode display
This shows the current time (CURRENT)
and the start and stop point timecode values
for the current reference device (START
TC, STOP TC). When you press a device
selection button, the button lights, selecting
the assigned device as the reference device,
and displaying its setting value.
1 Timecode display
CURRENT
START TC
STOP TC
DEV DEV DEV DEV DEV
1 2 3 4 5
FM1 FM2 SBOX SBOX
DELAY
CLIP CLIP 1 2
SET SET
START STOP SET
START STOP
TC TC DUR
TC TC
ALL
CUE REW PLAY FF
STOP
5 Editing
buttons
clip operation, at a speed determined by the
operating buttons.
frame memory clip, or shot box. The device
control block (trackball) and device control
block (joystick) can be used together.
7 TIMELINE button
8 STOP button
6 External device
TIME
SHTL JOG
LINE
STOP
DEV
6
SBOX
3
STB
OFF
REC
9 Search dial
3 SBOX buttons
In the case of the [SBOX] buttons, the
display does not change. When the
operation applies to a VTR/disk recorder,
the displayed setting value depends on
whether the [TIMELINE] button is on or
off, as follows.
When the [TIMELINE] button is on:
Displays the start and stop points of the
last set keyframe on the timeline. When
Names and Functions of Parts of the Control Panel
operation buttons
VAR ENBL
239