Table of Contents
Advertisement
Cross-point button settings (Xpt Assign)
• Xpt Assign: For each control block or bus, display and set the assignments
to the main table and tables 1 to 14. You can also carry out settings to link
switcher signal selection to the audio mixer.
• Main, V/K Pair Assign: Make cross-point settings for the main table.
– Assign video/key sources for button numbers 1 to 128.
– For each table, specify whether the rightmost cross-point button in each
row is used as a shift button, and the operation mode when it is used as a
shift button.
– For the [SHIFT] button in the cross-point control block and for each table,
select the mode in which this is a shift button dedicated to the source name
displays, or the mode in which it is a shift button for all buses.
– Disable cross-point buttons to work.
• Mixer Xpt Assign: Assign audio mixer cross-points to cross-point buttons
in the main table.
• Table Button Assign: Create tables 1 to 14 in the same way as the main
table.
• Src Name: Set source names of up to 16 characters.
• LCD Color: Set the LCD color for source name display.
• Table Copy: Copy table contents from the main table to tables 1 to 14 or
between tables 1 to 14 (it is not possible to copy tables 1 to 14 to the main
table).
• Name Export: This function sends the source name and destination name to
the S-Bus.
Auxiliary bus control block settings (Aux Assign)
• Aux Assign: Assign the AUX delegation buttons in the auxiliary bus control
block to any bus.
• Shift Mode: Specify whether the rightmost button of the AUX delegation
buttons is used as a shift button, and when it is used as a shift button, the
operation mode.
• RTR Mode Setting: Carry out the following settings for using the auxiliary
bus control block for router control.
– Assigning destinations
– Setting the shift operation in the destination selection button rows
– Source table settings
– Setting the shift operation in the source selection button rows
– Assigning levels to the level selection buttons
– Setting destination selection buttons to be used for snapshots
Button assignment settings (Prefs/Utility)
Assign the [PREFS 1] to [PREFS 16] buttons in the menu control block, the
utility/shotbox control block buttons, and the cross-Point control block.
177
Setup
Advertisement
Table of Contents
