Detailed changes to the flame arrestors of the field module
Variant 1
①
Flame arrestor field module
②
Pipe adapter
③
Union nut
④
Sealing cap
⑤
Sealing wax (protection against unauthorized removal)
Figure 6-2
Changed flame arrestors
Introduction of toxic, aggressive or flammable gases
When toxic, aggressive or flammable gases are introduced, carry out a leak test for these pipe
connections.
You can find additional information in the section →Checking the sample gas path for leaks
(Page 63).
Field device
Operating Instructions, 05/2022, A5E35640463-07
WARNING
Variant 2
①
Flame arrestor field module, with pipe
②
Sealing cap
Wiring
6.3 Field module
43