Fitting The Adjustable Feet - LG FA415RMA Owner's Manual

14 INSTALLATION
Appliance dimensions
Note the specified dimensions.
A = 89 - 149 mm
570 mm
595 mm
750 mm
895 mm
Adjacent units
Adjacent units must be made of non-combustible
material. The fronts of adjacent units must be
resistant to temperatures up to at least 90 °C. If the
appliance is fitted close to other units, the minimum
distances specified in the picture must be maintained.
min.
50 mm
min.
100 mm
650 mm
22 mm
A
min.
50 mm
min.
400 mm
min.

Fitting the adjustable feet

Beforehand:
• Remove all parts that are not permanently fixed,
especially the pan supports and burners.
• Remove the accessories from the oven.
Proceed as follows:
• Tilt the appliance by raising one side slightly from
the floor.
• With the plates in position, screw the adjustable
feet into the mounting holes on the underneath of
the appliance.
• Repeat the process on the other side.
You can make the final adjustments to the feet
in order to level the appliance once the gas and
electricity supply have been connected.
If it is necessary to pull the appliance, screw the
adjustable feet in fully. Make the final settings
only when the other installation tasks have been
completed.