Table of Contents
Advertisement
2. INSTALLATION AND PREPARATIONS FOR USE
2.5 Electric connection and safety (If available)
During the electric connection, follow the instructions stated in the user manual.
• The earthing cable must be connected to the earth terminal.
• You have to ensure the power cord with suitable insulation to be connected to the power source
during the connection. If there is no appropriate earthed electric outlet in accordance with
regulations in the place where the appliance to be installed, contact to our authorized service.
The earthed electric outlet must be close to the appliance.
• Do not use an extension cord.
• The power cord must not touch to the hot surface of the product.
• In case the cord is damaged, contact Authorized Service to have it changed.
• Any wrong electric connection may damage your appliance, as well as endangering your safety,
rendering your guarantee invalid.
• The appliance is adjusted for 230V 50Hz electricity. If the mains electricity is different contact
your authorized service.
L
2.6 Adjustment of feet
• The supply cord should be kept away from hot parts of
appliance. Otherwise, the cord may be damaged, causing
short circuit.
N
• The manufacturer declares that it has no responsibility
against any kind of damages and losses that are caused
by improper connections that are performed by
unauthorized people.
Figure 14
There are four pieces of adjustable feet inside of product.
Assemble the feet on suitable places of bottom panel
support sheet by rotating the feet clockwise as shown in
figure 15. When the product is placed where to be used,
check if the product is balanced. If it is not balanced, make
the adjustment of the feet by rotating the inner part of the
feet anti-clockwise if required. It is possible to raise the
appliance maximum 50mm by the feet. If the feet are
adjusted appropriately, it is required not to move the
inner part
appliance by dragging, it should be moved by lifting it up.
Figure 15
13
Advertisement
Table of Contents
