Mts - Replacing Site Controller Fru; Table 8-8 Site Controller - Fru - Motorola DIMETRA MTS 2 Installation, Configuration And Basic Service Manual

MTS 2 and MTS 4 Installation, Configuration and Basic Service Manual
MTS - Viewing and Editing Configuration File
Procedure 8-6 MTS - How to View and Edit the Configuration File
1
2
3
4

MTS - Replacing Site Controller FRU

Table 8-8 Site Controller - FRU

Part Number
WALN4339
See Appendix B
Procedure 8-7 MTS - How to Replace Site Controller
Disconnect the power cables to the MTS Power Supply Units.
1
Wear an ESD strap and connect its cable to a verified good ground. This strap must be worn
2
to prevent ESD damage to any components.
Tag and disconnect all other cabling from the Site Controller.
3
6802800U74-N September 2009
To view the previously uploaded configuration file, select Close Connection and observe that
your chosen file name is displayed at the top of the menu window.
Select Personality menu, select Modify and fill out the Site Title and Version boxes as
applicable (optional).
Enter the various config file fields to view the MTS parameters and make any appropriate
changes. Click OK.
Under the File menu, select Save.
for list of Periodic Maintenance Inspections.
Please refer to Appendix C, "Static Precautions and ESD Strap"
proceeding with replacement process.
If configuration with non-redundant power connection, the MTS Power Supply Unit
can be switched off as an alternative to removing the cables.
Shock Hazard. The MTS contains dangerous voltages which can cause
electrical shock or damage to equipment. Turn off the MTS and remove
the power cabling before servicing this equipment. Make sure all power
is off to prevent accidental contact with high energy and injury to
personnel.
Site Controller - MTS 2/ MTS 4
MTS - Viewing and Editing Configuration File
Description
before
8-21