Polaris RZR XP 1000 2014 Service Manual page 265

6. Note the alignment of the X's
moveable sheave. Remove the spider assembly
and spring.
NOTE
Spring is compression only and has no torsional wind.
r
7. Remove the E-clips , washers
y
rollers . Inspect the rollers for wear; replace if worn.
u
8. Press out the spring pins
9926816 R07 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.
w
on the spider and
e
t
, and the clutch
in the inner sheave.
9. Pull out the clutch slider pins
10. Separate the stationary sheave from the moveable
a
sheave. Note the X's on the stationary and fixed
sheaves for reassembly.
11. Inspect the clutch bushings for wear. If there is heavy
wear on the bushings, replace the clutch assembly.
12. Inspect the sheaves for excessive wear or damage.
PVT SYSTEM
i o
and sliders .
5
5.39