Toshiba V Series User Manual page 118

Appendix C Table of Trace Information
No. Event Level
0E05 Temperature Recovery
abnormality from
corrected failure
Registration
7000 Packing Caution
discontinued
(Instance
memory
management
error)
7001 Packing Caution
discontinued
(Entry code
memory
management
error)
7002 Packing Caution
discontinued
(POU code
memory
management
error)
D005 Batch Major
download not failure
conducted
User-program-related
D100 User task Major
stop illegal failure
instruction
detected
D102 User task Major
stop failure
boundary
over
D104 User task Major
stop POU failure
number
undefined
C
D106 User task Major
stop failure
arithmetic
stack error
7108 User task Caution
real-number
arithmetic
error
7109 User task Caution
boundary
error
710C User task Caution
division error
710D User task Caution
BCD
conversion
error
710E User task Caution
table
operation
error
710F User task Caution
encode error
7112 User task Caution
non-numeral
input
104
Execution
Timing Diagnosis
status
Periodical Continued Temperature
diagnosis abnormality
around CPU has
been corrected.
Continued Inconsistent
instance memory
management has
been detected.
Continued Inconsistent entry
code memory
management has
been detected.
Inconsistent POU
code memory
management has
been detected.
Startup in Error rundown Batch download
RUN mode of application
program has not
been conducted.
During user Error rundown Instruction nor
task defined in user
execution program has been
detected.
During user Error rundown Specified user
task task size is
execution exceeded.
During user Error rundown Designated
task function block or
execution function is not
found.
During user Error rundown Number of
task outputs from stack
execution is inconsistent is
inconsistent with
the number of
inputs.
During user Continued Improper real-
task number arithmetic
execution operation has
been executed.
During user Continued Access has been
task made to the area
execution outside variable
domain.
During user Continued Division by 0 has
task been executed.
execution
During user Continued BCD conversion
task has gone beyond
execution data range.
During user Continued Error has
task occurred in
execution handling a table,
such as LP_PARA
or PV_DATA.
During user Continued Limit error has
task occurred in
execution encoding.
During user Continued Non-numeral has
task been input by
execution real-number
arithmetic
instruction.
Task Address Aux1 Aux2
Block Number of Entry serial
number blocks number (0
to 308)
Block Number of Entry serial
number blocks number (0
to 308)
Block Number of POU
number blocks number (0
to 2047)
IP (Absolute) IP IR
(Relative)
IP (Absolute) IP IR
(Relative)
IP (Absolute) IP IR
(Relative)
IP (Absolute) IP IR
(Relative)
IP (Absolute) IP IR
(Relative)
IP (Absolute) IP IR
(Relative)
IP (Absolute) IP IR
(Relative)
IP (Absolute) IP IR
(Relative)
IP (Absolute) IP IR
(Relative)
IP (Absolute) IP IR
(Relative)
IP (Absolute) IP IR
(Relative)
model 3000 Loop Controller L3 User's Manual - Basic Hardware -
Aux3 Cause Actions to be taken
After memory clear, Conduct batch downloading of
RUN command has applicable application from
been entered before engineering tool.
batch downloading of
program from
engineering tool.
Failure of memory Clear memory of L3 controller,
and download program again.
Failure of memory Clear memory of L3 controller,
and download program again.
Function block or Set POU number of function
function has not been block or function in the normal
downloaded, or POU range (2048 to 4095), carry out
number is incorrect. compilation using a caller
project, and download compiled
program.
Compilation is not After completing compilation
normal. normally, download compiled
program.
For real-number Review values input for real-
arithmetic operation, number arithmetic operation,
an improper value and correct user task so that
that cannot be improper values are not input.
calculated, such as -
1^0.5 (the 0.5th
power of -1), has
been input.
For symbols of IL, ST, Correct structural variable name
relay, coil, etc., positions, indexing positions,
structure variable etc. that are out of the variable
names, array variable domain, and download program.
names, and/or
indexing are used,
their positions being
out of the variable
domain.
In division instruction, Correct user task so that divisor
divisor is set to 0. is not set to 0, and download
program.
In integer-to-BCD Correct user task so that input
conversion, input value does not exceed limit, and
value exceeds the download program.
limit (INT type: 9999,
DINT type:
99999999). In BCD-
to-integer conversion,
certain digit of input
value exceeds the
limit value (9).
Address for Review and correct table-
designating a table, designating address, and
such as LP_PARA or download program.
PV_DATA, is out of
range.
By real-number Correct user task so that non-
arithmetic instruction, numeral is not input, and
an inoperable value, download program.
such as infinite (Åá)
value (± 1.#INF), has
been input.