About This Documentation; Change Record; Overview On Target Groups And Product Phases - Bosch rexroth ctrlX HMI DE0015 Operating Manual

6 / 52

Overview on target groups and product phases

1

About this documentation

1.1

Change record

Table 1: Editions of this documentation
Edition Release Note
date
01 2020-09 First edition
02 2021-02 Initial commissioning supplemented, E-STOP notes supplemented
03 2021-08 Instruction on device assembly added
1.2 Overview on target groups and product phases
In the following illustration, the framed activities, product phases and target groups refer to the present
documentation.
Example: In the product phase "Mounting" (assembly/installation), the "Mechanic/electrician" can
execute the activity install using this documentation.
Product
Selection
phases
Presales Aftersales
Design engineer
Programmer
Technologist
Target
Process
groups
specialist
Select
Prepare
Activities
Design
Construct
Fig. 1: Assigning the present documentation to the target groups, product phases and activities of the
target group
This document instructs the technical staff of the machine manufacturer on how to safely perform the
mechanical and electrical installation and on how to commission the device.
Bosch Rexroth AG
Mounting
Engineering
(assembly/installation)
Mechanic/
electrician
Programmer
Commissioning engineer
Unpack Parameterize
Mount Program
Install Configure
Simulate
ctrlX HMI DE0015, DE0021
Commissioning Operation
Technologist
Process specialist
Machine
operator
Maintenance
technician
Service
Optimize Operate
Test Maintain
Remove
faults
Create
the NC program
R911405731, Edition 03
Decommissioning
Mechanic/
electrician
Disposal company
Dismount
Dispose