Table of Contents
Advertisement
40 / 52
"On Screen" menu
12.2
"On Screen" menu
Make the display settings of the DE devices via the "On Screen" menu. To operate the "On Screen"
menu, use the two touch buttons i and Home on the front of the DE devices:
•
"Home" key
•
"i" key
Navigating within a menu
If there is no operation for five seconds, the currently selected setting is applied automatically.
12.2.1 Brightness
The screen brightness is set via the "On Screen" menu under the menu item Brightness.
Fig. 31: On Screen menu – Brightness
1.
Press the "Home" key to open the On Screen menu.
2.
Press the "i" key to toggle to the menu item "Brightness".
3.
Press the "Home" key to confirm the selection to go to the "Brightness" menu.
4.
Press the "Home" key to set the brightness between 0 and 100 percent.
5.
Press the "i" key to toggle to "Exit".
6.
Press the "Home" key to confirm the selection.
If the brightness is 0, the display on the screen cannot be seen anymore.
12.2.2 Video Input
To set the video interface used (XCDI+rx, XDP, XHDMI), go to the On Screen menu under the menu item
"Video Input".
Fig. 32: On Screen menu – Video Input
Bosch Rexroth AG
Opening the "On Screen" menu
Confirming the selected menu item.
Brightness
Video Input
PIP
Touch
Exit
Brightness
Video Input
PIP
Touch
Exit
Brightness
Exit
90%
Input
DP
Input
HDMI
Input
RX
Exit
ctrlX HMI DE0015, DE0021
R911405731, Edition 03
Advertisement
Table of Contents
