GE FVP110 Maintenance Manual page 206

GE Energy
Relative Index Parameter
Index
18 2018 SERVO_
GAIN (*1)
19 2019 SERVO_
RESET (*1)
20 2020 SERVO_
RATE (*1)
21 2021 ACT_FAIL_
ACTION
22 2022 ACT_MAN_ID 0
23 2023 ACT_MODEL
_NUM
24 2024 ACT_SN
25 2025 VALVE_MAN
_ID
26 2026 VALVE_
MODEL
_NUM
27 2027 VALVE_SN
28 2028 VALVE_TYPE 1
29 2029 XD_CAL_
LOC
30 2030 XD_CAL_
DATE
31 2031 XD_CAL_
WHO
32 2032 ALARM_
SUM
Table 61 Transducer Block Parameters (Continued)
Default
Name (factory
setting)
120
15 sec
0. 22 sec
1
Null
0
0
Null
0
Null
01/01/00
Null
FVP 110 Fieldbus Valve Positioner Manual
Write
O/S Static control loop gain set by auto tuning [0.5
to 1300 ]
O/S Integral time set by auto tuning.
O/S Derivative time set by auto tuning.
O/S Specifies the actuator action direction (in case
of losing of air supply pressure):
1 = Air to Open
2 = Air to Close
—
ID of actuator manufacturer
—
Model number of actuator
—
Serial number of actuator
—
ID of valve manufacturer
— Model number of valve
Serial number of valve
O/S Valve type:
1 = linear-motion valve
2 = rotary-motion valve
Shows and is used to record the location where
the positioner was calibrated.
Shows and is used to record the date when the
positioner was calibrated.
Shows and is used to record the person who
calibrated the positioner.
Shows the alarm summary (current alarm
statuses, acknowledged/unacknowledged
states, masking states) for the transducer
block.
190
Description