Parameters Of Transducer Block; Transducer Block Parameters - GE FVP110 Maintenance Manual

GE Energy
Relative Index Parameter
Index
51 1051 DEVICE_STA
TUS_7
52 1052 DEVICE_STA
TUS_8
*1: FF-891 "Foundation

Parameters of Transducer Block

Parameters marked with (*1) are automatically set and changed by autotuning.
Parameters marked with (*2) are automatically set and changed by Travel calibration.
Relative Index Parameter
Index
0 2000 Block Header
1 2001 ST_REV
2 2002 TAG_DESC
3 2003 STRATEGY
4 2004 ALERT_KEY
5 2005 MODE_BLK
Table 60 Resource Block Parameters (Continued)
Default
Name (factory
setting)
0
0
TM
Specification Function Block Application Process Part 2"
Table 61 Transducer Block Parameters
Default
Name (factory
setting)
0
Spaces
1
1
O/S
FVP 110 Fieldbus Valve Positioner Manual
Write
— Not used in the FVP110.
— Not used in the FVP110.
Write
Block Tag Information about this block, including the
=O/S block tag, DD revision, execution time
— Incremented when a change is made to the
parameter settings for the resource block to
indicate the revision level of the settings, and
used to see whether or not there is a change in
parameter settings.
Universal parameter storing the description of
the tag
Universal parameter used by an upper-level
system to classify the function blocks
Universal parameter used as a key to identify
the point from which an alert is issued;
normally used by an upper level system to
select alerts to provide to a particular operator
who covers a specific area of the plant.
Universal parameter that indicates the block
operation conditions and is composed of actual
mode, target mode, permitted modes, and
normal mode.
188
Description
Description