2.16 Peripheral Connectors
The EVM board contains a group of Peripheral Expansion Connectors used to gain access
to the resources of the DSP56F801. These signal groups have Expansion Connectors:
• Timer Channel D
• A/D Input Port
• Serial Communications Port
• Serial Peripheral Port
• PWM Port
• External Control Lines
2.16.1 External Control Signal Expansion Connector
The External Control Signal connector contains the DSP's external interrupt and Reset
control signal lines. Refer to
Table 2-7. External Control Signal Connector Description
2.16.2 Timer Channel D Expansion Connector
The Timer Channel D port is an MPIO port attached to the Timer D expansion connector.
Refer to
Table 2-8
for the signals attached to the connector.
Table 2-7
for the names of these signals.
Pin #
Signal
1
IRQA
3
N/C
5
GND
Table 2-8. Timer D Connector Description
Pin #
Signal
1
TD0
3
TD2
5
GND
Technical Summary
J2
Pin #
Signal
2
RESET
4
DE
6
+3.3V
J5
Pin #
Signal
2
TD1
4
N/C
6
+3.3V
Peripheral Connectors
2-19