Sony FVS-1000 System Maintenance Manual page 36
Multi resolution film scanner, multi resolution telecine, telecine processor, telecine hdtv/sdtv processing boards, telecine log data processor, telecine 16 mm film adaptor kit, telecine optical kit, telecine mounted slide kit, telecine film sound process
Hide thumbs
Also See for FVS-1000 System:
- Operation manual (44 pages) ,
- Maintenance manual (138 pages)
Table of Contents
Advertisement
1-10. Installation Procedure
(12)Insert the processor board along the guide rail.
n
. When inserting the processor board, confirm the processor board name on the label.
. Insert the processor board completely until the connector is connected.
(13)Connect the flat cable with the CN6027 connector on the MY-89 board.
(14)Connect the three coaxial cables with the CN402, 702 and 120 connectors on the ADC-36 board.
(15)Install the front cover, then tighten four screws.
n
Pull out the flat cable and the coaxial cables connected with the processor boards through the notch of
the front panel, then fix with the clip plate and two screws (PSW3 x 6).
Top view
Notch
Clip plate
Rear side
(1) Loosen the two screws (with stopper), then remove the cover.
1-24
Cables
Processor board
Handle
Harness
band
Front cover
PSW3 x 6
Clip plate
Screw
(with stopper)
Screw
(with stopper)
Cover
ADC-36 board
MY-89 board
Label
Flat cable
Coaxial cables
CN402
CN702
CN6027
CN102
FVS-1000 MMP1
Advertisement
Table of Contents
