Led, Tp And Dip Switches Meanings; Commands - Sony FVS-1000 System Maintenance Manual

6-4. OPS Assembly Adjustment
6-4-5. SV-186 LED, TP and DIP Switches
meanings.
Table below are LED, TP and dip switches meanings.
LED reference Meaning
D508/SV-186 Invert each time pass mainroutine
D504/SV-186 On when in timer int interrupt
D507/SV-186 On when in delay1 int interrupt
D503/SV-186 On when in delay2 int interrupt
D506/SV-186
D502/SV-186
D505/SV-186 On when OPS stop any reason (able to
check by ver command)
D501/SV-186
TP reference Meaning
TP502/SV-186
TP503/SV-186 H: film move
TP507/SV-186
TP508/SV-186
TP512/SV-186 H: delay2 int interrupt
TP513/SV-186 H: delay1 int interrupt
TP514/SV-186 H: timer int interrupt
TP515/SV-186
S502/SV-186 Open
1 to 7 Not used
8 Any interrupt disable
6-14
L: film stop
Close
Not used
Normal inerrupt
6-4-6. SV-186 Commands
Command Action or response
from PC
Ver Display version and basic status.
Also reply any errors is there are any.
Adjust Test mode and memorize posison of glass
(see table 4 and read section 6-4-3. item 3)
Gain vp To adjust vertical glass move gain
(See section 6-4-3. item 3)
Gain vd To adjust vertical glass move gain
(See section 6-4-3. item 3)
Gain hp To adjust horizontal glass move gain
(See section 6-4-3. item 3)
Gain hd To adjust horizontal glass move gain
(See section 6-4-3. item 3)
Gain tv To adjust vertical picture stability
(See section 6-4-3. item 4)
Gain th To adjust horizontal picture stability
(See section 6-4-3. item 4)
Target set To put data of gain tv and gain th.
Aging OPS aging mode (See section 6-4-3. item 3)
Rev comp For adjust picture move cause when Rev and
Fwd.
FVS-1000 MMP1