Siemens SINUMERIK 840D sl Programming Manual page 521

G35 17.
INVCW 18.
INVCCW 19.
If no function from the group is programmed with modal G functions, the default setting, which can be changed in the
machine data (MD20150 $MN_$MC_GCODE_RESET_VALUES), applies:
Group 2: Non-modally valid motions, dwell time
G function
1)
No.
G4 1.
G63 2.
G74 3.
G75 4.
REPOSL 5.
REPOSQ 6.
REPOSH 7.
REPOSA 8.
REPOSQA 9.
REPOSHA 10.
G147 11.
G247 12.
G347 13.
G148 14.
G248 15.
G348 16.
G5 17.
G7 18.
Group 3: Programmable frame, working area limitation and pole programming
G function
1)
No.
TRANS 1.
ROT 2.
SCALE 3.
MIRROR 4.
ATRANS 5.
AROT 6.
ASCALE 7.
AMIRROR 8.
9.
Fundamentals
Programming Manual, 09/2011, 6FC5398-1BP40-2BA0
Thread cutting with linear decreasing lead
Involute interpolation clockwise
Involute interpolation counter-clockwise
Significance
Dwell time preset
Tapping without synchronization
Reference point approach with synchronization
Fixed-point approach
Linear repositioning
Repositioning in a quadrant
Repositioning in semicircle
Linear repositioning with all axes
Linear repositioning with all axes, geometry axes in
quadrant
Repositioning with all axes; geometry axes in
semicircle
Approach contour with straight line
Approach contour with quadrant
Approach contour with semicircle
Leave contour with straight line
Leave contour with quadrant
Leave contour with semicircle
Oblique plunge-cut grinding
Compensatory motion during oblique plunge-cut
grinding
Significance
TRANSLATION: Programmable offset
ROTATION: Programmable rotation
SCALE: Programmable scaling
MIRROR: Programmable mirroring
Additive TRANSLATION: Additive programmable
offset
Additive ROTATION: Programmable rotation
Additive SCALE: Programmable scaling
Additive MIRROR: Programmable mirroring
Unassigned
16.4 G function groups
+ m
+ m
+ m
2) 3)
MD20150 W
- n
- n
- n
- n
- n
- n
- n
- n
- n
- n
- n
- n
- n
- n
- n
- n
- n
- n
2) 3)
MD20150 W
- n
- n
- n
- n
- n
- n
- n
- n
Tables
4)
STD
SAG MM
4)
STD
SAG MM
521