Siemens SINUMERIK 840D sl Programming Manual page 111

Example 3: Helical interpolation
Path axes X and Y traverse with the programmed feedrate, the infeed axis Z is a
synchronized axis.
Program code
N10 G17 G94 G1 Z0 F500
N20 X10 Y20
N25 FGROUP(X,Y)
N30 G2 X10 Y20 Z-15 I15 J0 F1000 FL[Z]=200
...
N100 FL[Z]=$MA_AX_VELO_LIMIT[0,Z]
N110 M30
Fundamentals
Programming Manual, 09/2011, 6FC5398-1BP40-2BA0
7.1 Feedrate (G93, G94, G95, F, FGROUP, FL, FGREF)
Comment
; Feed of the tool.
; Approach of the starting
; Axes X/Y are path axes, Z is a
; On the circular path, the
; The limit speed is deselected
; End of program.
Feed control
position
synchronized axis.
feedrate is 1,000 mm/min,
traversing in the Z direction
is synchronized.
by reading the speed from the
MD. Read the value from the
MD:
111