Siemens SINUMERIK 840D sl Programming Manual page 476

Tables
16.1 Operations
Operation Meaning
POLFMLIN Enable axes for retraction with a linear
connection between the axes
POLY Polynomial interpolation
POLYPATH Polynomial interpolation can be
selected for the AXIS or VECT axis
groups
PON Punching ON
PONS Punching ON in interpolation cycle
POS Position axis
POSA Position axis across block boundary
POSM Position magazine
POSP Positioning in sections (oscillating)
POSRANGE Determine whether the currently
interpolated position setpoint of an axis
is located in a window at a predefined
reference position
POT Square
(arithmetic function)
PR Per revolution
PREPRO Identify subprograms with preparation
PRESETON Set actual values for programmed axes
PRIO Keyword for setting the priority for
interrupt processing
PROC First operation in a program
PTP Point-to-point motion
PTPG0 Point-to-point motion only with G0,
otherwise CP
476
1) 2)
W Description see
PGsl
m
Fast retraction for thread cutting (LFON, LFOF, DILF,
ALF, LFTXT, LFWP, LFPOS, POLF, POLFMASK,
POLFMLIN) [Page 267]
PGAsl
m
PGAsl
m
m PGAsl
PGAsl
m
PGsl
Traversing positioning axes (POS, POSA, POSP, FA,
WAITP, WAITMC) [Page 118]
PGsl
Traversing positioning axes (POS, POSA, POSP, FA,
WAITP, WAITMC) [Page 118]
FBW
PGsl
Traversing positioning axes (POS, POSA, POSP, FA,
WAITP, WAITMC) [Page 118]
PGAsl
PGAsl
PGsl
Approach and retraction (G140 to G143, G147, G148,
G247, G248, G347, G348, G340, G341, DISR, DISCL,
FAD, PM, PR) [Page 298]
PGAsl
PGAsl
PGAsl
PGAsl
PGAsl
m
PGAsl
m
Programming Manual, 09/2011, 6FC5398-1BP40-2BA0
Fundamentals