Toshiba V Series User Manual page 199

(5) Self-check of duplex configuration
Check item
Tracking
receive error
Equalize
receive error
Partial
equalize
receive error
Timeout for
completion of
equalize
receive
Timeout for
completion of
tracking
receive
Remote CPU
module error
Power outage
at remote
system
Broken cable
for tracking
monitor
Broken cable
for tracking
transmission
Primary/
Secondary
switch setup
error
Duplex
software
status error
Duplex
hardware
status error
6F8C0836
Table 6-7 Self-check of duplex configuration
Operation when error is
Self-check
Online
controller
Standby controller Single
detected a tracking operation
receive error. mode
The controller Single
receiving equalize operation
has detected a mode
receive error.
The controller Single
receiving partial operation
equalize has mode
detected a receive
error.
The controller Single
receiving equalize operation
has detected timeout mode
for equalize receive.
The controller Single
receiving tracking operation
has detected timeout mode
for tracking receive.
Has detected error Single
down of the remote operation
CPU module. mode
Has detected power Single
outage of the remote operation
system. mode
Has detected broken Single
cable for tracking operation
monitor. mode
Error down at both sides
when RUN is requested
from HOLD mode.
Has detected broken Single
cable for tracking operation
transmission. mode
Error down at both sides
when RUN is requested
from HOLD mode.
Has detected mode Error down Error down Set the primary and secondary
switch setup error in
the expansion
interface module.
Has detected duplex Single
software status parity operation
error. mode
Has detected duplex Single
hardware status operation
parity error. mode
detected
Operator action
Standby
controller
Error down Check connection of the
expansion interface module,
and tracking transmission/
monitoring cables, and restart
Error down
the system.
Error down
Error down
Error down
Error down Correct the remote CPU
module error, and restart the
system.
power Power up the remote system.
outage
Error down Check cables to connectors
and internal breakage of
cables, and restart the system.
Error down
power supplies at both
systems so that they donÅft
overlap, and restart the
system.
Error down Check installation of the S2
module, expansion interface
and module base, and restart
the system.
Error down
6.8 RAS Function
6
177