Supplementary
1. After installing the modules, secure the bases so that it can be mounted vertically, including
when in transport.
2. A cover is mounted on the connector of the base for shipment. Remove this connector cover
when mounting modules.
1. Install the model 2000 modules - power supply, CPU, direct I/Os on the dedicated base.
Do not use any modules of the model 2000 for the purpose other than specified.
This can cause electrical shock or injury.
2. For safety, always turn power OFF before installing and removing modules or installing and
removing terminal blocks.
3. Entering wire scraps or other foreign debris into to the model 2000 and related equipment
can cause fire or malfunction. Pay attention to prevent entering them into model 2000 and
relatde equipment during installation and wiring.
4. Check for proper connections on wires, connectors and modules. Insufficient contact can
cause malfunction or damage to the model 2000 and related equipment.
6F8C0836
Caution
4.3 Mounting the Modules
139
4