Installation And Wiring; Operating Environment - Toshiba V Series User Manual

Chapter 4 Installation

4.1 Operating environment

Do not install the model 2000 in the following locations :
(1) Where the ambient temperature drops below 0 ° C (32 ° F) or exceeds 55 ° C (131 ° F)
(2) Where the relative humidity drops below 10% or exceeds 95%
(3) Where there is condensation due to sudden temperature changes
(4) Where there are vibrations that exceed the tolerance of the model 2000
(5) Where there are shocks that exceed the tolerance of the model 2000
(6) Where there are corrosive or inflammable gasses (SO
(7) Where there are dust, machining debris or other particles
(8) In locations exposed to direct sunlight
Observe the following precautions when installing enclosures for mounting the model
2000 :
(1) Provide the maximum possible distance between high-voltage or high-power panels.
(2) If the enclosures are installed near high-frequency equipment, be sure to ground the
enclosures correctly.
(3) When sharing the channel base with other panels, check for leakage currents from
the other panels or equipment.
1. Excess temperature, humidity, vibration, shocks, or dusty and corrosive gas environment
can cause electrical shock, fire or malfunction. Install and use the model 2000 and related
equipment in the environment described in this manual.
2. Improper installation directions or insufficient installation can cause fire or the units to drop.
Install the model 2000 and related equipment in accordance with the instructions
described in this manual.
6F8C0836
and Wiring
, H
2
Caution
S, etc)
2
133