Dmw-C4 Trackball Control Panel - Sony DMW-S05NL-C Installation Manual

5 MONITOR OUT connector (stereo minijack)
Outputs the signal input to the MONITOR IN
connector in a loop-through manner. You can connect
optional active speakers to this connector. Audio
signals are output to the MONITOR OUT connector
even when headphones are connected to the
HEADPHONES connector.
6 MONITOR IN connectors (RCA phono jack,
×2)
Connect to the MON OUT L/R connectors of the AV
I/O Block.
2-2-4 DMW-C4 Trackball Control
Panel
1 USB cable
2 Function buttons A to F
C
D
B
E
A
5 Left button
1 USB cable
Connect to the Jog & Shuttle Control Panel or the
Audio Control Panel.
2 Function buttons A to F
These buttons have some default functions assigned to
them, but they can be customized for other functions.
Refer to the Operation Manual about the functions assigned
to these buttons and for how to perform button
customization.
F
3 Trackball and Z ring
4 Right button
3 Trackball and Z ring
According to the function selected with the function
buttons A to F, you can use these controls for effect
operations, parameter adjustments, and so on.
4 Right button
Confirms the function that was executed or the
parameter that was adjusted with the trackball and Z
ring.
5 Left button
A variety of functions are assigned to this button in
combination with the function buttons. The button can
be customized for other functions.
Refer to the Operation Manual about the functions assigned
to the buttons and for how to perform button customization.
Chapter 2 Names and Functions of Parts
2-13