Tools - GE eBike III basic Series Service Manual

t
ools
The following tools (metric) are recommended to disassemble the eBike III devices:
Flat bladed screwdrivers:
1 pc 1 0 x 0 18 mm
1 pc 4 5 x 0 8 mm
Philips screwdrivers:
1 pc PH 2
1 pc PH 3
Fork wrenches:
1 pc 10 mm
1 pc 13 mm
1 pc 14 mm
1 pc 17 mm
1 pc 19 mm
Pliers
1 pc side cutter
1 pc flat nose pliers
Special tools
1 pc crank extractor (P/N 2005737-001)
1 pc round pin, max 3 mm, minimum length 15 mm
1 pc torque wrench (10 - 100 Nm)
1 pc calibrated NIBP measurement instrument set
1 pc external calibration device for dynamic load testing
("ergoline ergotest 550" - order direct from Ergoline P/N 705890) or equivalent device
- 18 -
Allan keys:
1 pc 2 5 mm straight and elbow
1 pc 3 mm straight and elbow
1 pc 4 mm straight and elbow
1 pc 5 mm straight and elbow
1 pc 6 mm straight and elbow
1 pc 8 mm straight and elbow
1 pc extension for Allen key 8 mm (drive unit exchange)
Socket wrenches:
1 pc 10 mm
1 pc 13 mm
1 pc 14 mm
1 pc TORX T30
eBike III basic / comfort 2018111-336 Rev. B