Siemens SINUMERIK 840D sl Commissioning Manual page 515

08/2005
Displaying the axis names/axis values
The display of axis names and axis values in simulation can be configured in the
DPSIM.INI file and applies to all channels.
By default the first 3 geometrical axes are displayed. In addition, any other channel
axes can also be displayed. Assignment takes place in the [LINKS] section
[LINKS]
ACT_POS_DISPL_1=1
ACT_POS_DISPL_2=2
ACT_POS_DISPL_3=3
ACT_POS_DISPL_4=0
ACT_POS_DISPL_5=0
Value =
Value =
Value = 1 to n
The indices of the geometrical/channel axes are permitted as values (1 to number
of axes), axes that are not present are ignored. A maximum of 5 axis names and
values can be displayed simultaneously.
Formatting
The number of digits (3 to 15) can be specified for formatting the axis values.
[LINKS]
ACT_POS_DIGITS=10
The number of digits after the decimal point (maximum number of digits) is read
from the simulation initialization data via MD 9004 DISPLAY_RESOLUTION or
MD 9011 DISPLAY_RESOLUTION_INCH.
Hiding axes
The geometry/channel axes can be hidden using MD 20098 DISPLAY_AXIS. Bit 0
(display in the actual-value windows) is evaluated for the simulation.
At a maximum, as many axes can be displayed with their values that are not
hidden with ACT_POS_DISPL_<x> with 0, i.e. at a maximum, the first 5 unhidden
geometry/channel axes in their sequence.
Note
The more space that is required to display the axes, the less space is available to
display the actual block. If necessary, the axis display can be disabled off from
the Settings/Options On/Off menu in the "Actual position" field (within the Display
options field).
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D Installation and Start-Up HMI (IAM) - 08/2005 Edition
0 The associated space in the display is freed
1 The associated default geometrical axis is displayed
Geometrical axis is displayed
(n = 1 to number of generated axes)
Commissioning HMI Advanced (IM4)
2 Functions/Parameterization
IM4/2-121