Huawei IN200 NIC
User Guide
l
l
l
l
l
l
l
l
l
1.4 Technical Specifications
Table 1-3
Table 1-3 Technical Specifications
Item
Form factor
PCIe port
NIC chip
Network port
IPv6
PXE
Mean time
between failures
(MTBF)
Mean time to
repair (MTTR)
1.5 System Requirements
Hardware Requirements
To use the IN200, a server must have a standard PCIe x16 slot.
Issue 06 (2019-07-27)
Supports Data Plane Development Kit (DPDK).
Supports MCTP.
Supports Collection of out-of-band chip logs.
Supports NIC management tools on the CLI.
Supports In-band one-click logs collection.
Supports Loopback tests.
Supports Port location indicators.
Supports Ethernet port Forward Error Correction (FEC) mode configuration.
Supports Ethernet port auto-negotiation.
NOTE
l The IN200 supports the Legacy and UEFI modes. The PXE is not supported in Legacy mode.
l The GE mode supports only GE optical modules, basic packet receiving and sending, and stateless
offload, and does not support features such as SR-IOV, DPDK, and RoCE.
lists the basic technical specifications of the IN200.
Specifications
Low-profile NIC, supporting a full-height or half-height bracket
PCIe x16 port, compatible with x8, x4, x2, and x1; PCIe 3.0,
compatible with 2.0, 1.0
Huawei HiSilicon Hi1822 NIC chip
Four Ethernet service ports (SFP28, 25GE/10GE )
Supported
Supported (default) and supported for secure boot
174324 hours
180 seconds
Copyright © Huawei Technologies Co., Ltd.
1 Getting to Know the IN200
5