Querying And Setting The Sdi Card Mode (Sdi_Mode); Querying The Sdi Card Mode - Huawei IN200 User Manual

Huawei IN200 NIC
User Guide
Example
# Query the interrupt coalesce parameters of hinic0.
[root@localhost tool]# hinicadm inter_coal -i hinic0
coalesce_timer_cfg: 32
pending_limt: 24
pkt_rate_low: 40000
rx_usecs_low: 16
rx_pending_limt_low: 2
pkt_rate_high: 100000
rx_usecs_high: 64
rx_pending_limt_high: 8
# Set the interrupt coalesce parameters of hinic0.
[root@localhost tool]# hinicadm inter_coal -i hinic0 -c 64 -p 30 -rl 50000 -ul 8 -
pl 4 -rh 90000 -uh 10 -ph 10
Set interrupt coalesce parameters succeed.

6.1.4.41 Querying and Setting the SDI Card Mode (sdi_mode)

6.1.4.41.1 Querying the SDI Card Mode

Function
The sdi_mode command is used to query the SDI card mode.
Format
hinicadm sdi_mode -i <devicename>
Parameters
Parameter
devicename
Usage Instruction
None
Example
# Query the SDI card mode.
linux-EXvCVE:~ # hinicadm sdi_mode -i hinic0
Current sdi mode: vm
SDI mode in permanent configuration: vm
Issue 06 (2019-07-27)
Description
Indicates the name of the
IN200 whose FEC mode is to
be queried in the system.
Copyright © Huawei Technologies Co., Ltd.
6 Management Tools
Value
Example: hinic0 and
hinic1
101