2.Working via 2.4GHz USB Receiver (By default)
.Scan " RF 2.4GHz Transmission".
①
.Plug the USB receiver on your device.
②
.Set Keyboard language→See page (5) .
③
.Locate cursor on the place where you want scanner to output the
④
codes after that you can start to scan.
3.Working via Bluetooth
.Scan "Bluetooth Transmission".
①
.Power on scanner by triggering the button.
②
.Pair bluetooth. →See page(3 )
③
Bluetooth HID mode (Basic Mode) was set by default.
If you want to work via BLE or SPP , please contact us.
.Set Keyboard language→See page (5).
④
.Open a file or software, locate cursor on the place where you want the
⑤
scanner to output the codes then you can start to scan.
%#IFSN0$1
*RF 2.4GHz Transmit
%#IFSNO$4
Bluetooth Transmission
2