Table of Contents
Advertisement
This Wireless Bar Code Scanner is an ingenious device with unique triggger
design and excellent performance. It is produced under advanced techniques, with
finest chipsets and fully conforms with ergonomics requirements. It is fast and
accurate in all 1D codes reading and programmed to better read incomplete or fuzzy
codes. It can be widely used in domains including commercial POS system,
supermarkets, warehousing and logistics, libraries, banks, transportation, postal
service, industrial and manufacturing process management.
It is represents an optical combination of proven high property scanning
technology and state-of-the-art ergonomics, featuring
-- Long-distant and fast transmission,
-- Data storage,
-- Scan number display,
-- Network construction, and
-- Application of Anti-jamming Frequency Hopping Technology.
This product brings convenience, comfort, high-speed and stability into your bar code
scanning.
Features and Advantages
1. It could be used as a collector, memory 4M can be extended to 8M
2. Never lose data, clear warning.
3. Intelligent uploading; can choose to upload data of last scans and resume uploading
from breakpoints.
4. No-messy-code programmed, data counting, repeated code and out of the base
range warning, ID display.
5. Beeper and light indicates if the scanner is out of the base range and scanning will
automatically switch to storage mode.
6. Support one to one, one to many, many to one operation; and each base can respond
to up to 254 scanners.
7. The terminal communicates with the base at long distance of 150 meters indoor or
300 meters outdoor.
8. 1200MA replaceable lithium battery enables 6-10 hours continuous use after full
charge and avoids trouble of returning to factory for replacing battery. Base supports
data transmission and battery charging.
9. Germany imported quartz scanning window; effective light penetration,
scratch-proof.
10. Supports USB, PS2, RS232 and other designated interface.
Introduction
1
Advertisement
Table of Contents
Related Manuals for Netum NT-1203
Summary of Contents for Netum NT-1203
- Page 1 Introduction This Wireless Bar Code Scanner is an ingenious device with unique triggger design and excellent performance. It is produced under advanced techniques, with finest chipsets and fully conforms with ergonomics requirements. It is fast and accurate in all 1D codes reading and programmed to better read incomplete or fuzzy codes.
-
Page 2: Unpacking The Scanner
Unpacking the scanner Your scanner was thoroughly tested and inspected before it was shipped from the factory. The shipping box contains: Wireless Barcode Scanner 1 piece Base 1 piece Battery Pack 1 piece USB cable 1 piece Antenna 1 piece Association card 2 pieces User’s guide... -
Page 3: Installing The Scanner
Installing the scanner Connecting the base with USB cable to a computer 1. Connect the base with the cable into the computer’s connector. 2. Windows will automatically install the driver. (If not, you need to install the driver by manual on the host to communicate with the scanner.) 3. - Page 4 Performance Parameters Title Parameter Operating Channel 433.79MHz|SM Communication Distance 150 meters indoor; 300 meters outdoor Type of illuminant 650nm laser Operation way Hand-held or bracket-held Bit Error Rate(BER) 1/ 800 million Meet the Grade Ⅰ National Criteria for Laser Safety Performance Safety EAN-8，EAN-13，UPC-A，UPC-E，Code 39，...
-
Page 5: Operating The Scanner
Operating the scanner Before you start scanning, make sure: • The terminal has adequate power . • The scanner, cable and the Host are connected. • All cable connections from the base station are secure. To scan bar codes 1. Aim the scanner at a slight angle or pitch to the bar code and press the trigger. 2. -
Page 6: Configuring The Scanner
Configuring the scanner Play around in the settings menu to configure the device to your exact specifications. Setting Code Description Note The scanner emits 1 beep and the blue light flashes once when the base successfully receives Scan this code to enter signals. - Page 7 Configuring the scanner (continued) You can scan this code to resume uploading from the breakpoint when uploading is broken down (when the base is disconnected or powered off). e.g.: if uploading is broken down Scan this code to resume at the 6th code of total 10 stored uploading data from the codes.
- Page 8 Scanner Transmitter Setting Enter setting Setting Code Description Note Set working channel: e.g.: NT 111=10#, set working … Set transmitter channel channel 10. Range: 00-15, end with Set transmitter ID: 1#, 2#... …100#, … e.g.: NT 121=100#, set transmitter ID 100. Range: 254# Set transmitter ID 1-254, end with #.
- Page 9 Scanner receiver setting Enter setting Setting Code Description Note Set receiver channel: e.g.: NT 211 = 10#, set working channel … Set receiver channel 10. Range: 00-15, end with #. Set receiver ID: e.g.: NT 221=100#, set transmitter ID … 100#, … 200.
- Page 10 Repeated code detection setting Setting code Function Description When this function Enable repeated activated, code detection. scanner will give an error alarm with 5 Note: this setting beeps will automatically Enable repeated code automatically saved cancel last detection remain repeated code if a effective after repeated...
- Page 11 Save & Exit Appendix – 1 0 – 9, #, TEST 1234567890 TEST 1234567890 Restore All Original Scanner Settings Start Wireless Scanning...
-
Page 12: Troubleshooting The Scanner
Display version information Troubleshooting the scanner This table lists potential problems and their solutions. Symptom Cause Solution When the reader is out of range and not To restore normal mode, scan the normal associated to the base, mode code on the white association The base does not storage mode will be cards or 6... - Page 13 after you remove the base cable, repeat the above steps.) 7) scan the last code on page 9 “save & exit”. Troubleshooting the scanner (continued) The reader does not emit The reader is Make sure the battery pack is fully a beam and read bar not receiving charged.
- Page 14 scanned. Scanner does not read Reflected light Scan at a slight angle or pitch to the bar “shiny” bar codes. code (see “Operating the Scanner” distorts scan beam. earlier in this guide). Further operating the scanner Operation Scan the related bar codes in “bar code To display the total scan number, to clear stored data, to upload data.
-
Page 15: Maintaining The Scanner
4) scan the code “save & exit” on page 8 to finish transmitter channel setting. Set receiver channel. 5) scan the code “enter setting” on page 9. 6) scan the code “set receiver channel” on page 9. Further operating the scanner (continued) 7) scan the number code “6”... -
Page 16: Warranty
85% relative humidity. • Operate the battery pack in temperatures within -20° C to 45° C (-4° F to 113° F) and store the battery pack in temperatures within -20° C to 45° C (-4° F to 113° F). • when powered on, the wireless function will automatically send code data each 11s. - Page 17 (4) Damage resulting from failure to follow instructions contained in your owner’s manual; (5) Damage resulting from the performance of repairs or alterations by someone other than an authorized service center; (6) The product has been subjected to abnormal physical or electrical stress, including lightning strike, misuse, negligence, or accident;...